• Main Menu
  • Diamond Tool Sizes

    Diamond tool sizes vary because there are so many of them. Diamond blades alone come in different sizes. Some measure 4 1/2 inches. Others are 7 inches, 10 inches, 4 inches and so on. 
     
    Overview of Diamond Cutting Equipment
     
    These tools are fitted with diamond grains fastened on the functional components of the utility. This is done by way of a bonding material. Diamond dressing tools or diamond dressers are multipoint or single point utilities brazed on metal shanks. Diamond dressers are utilized for dressing grinding wheels. 
     
    Types of Diamond Dressers 
     
    These cutting tools are available in many variants. These include crown, disc, grit and blade types. The diamond tool sizes will vary for each type. 
     
    Multipoint tools have several advantages over their single point counterparts. They are more precise, particularly with form grinding. Blade thicknesses vary, with some 0.75 to 1.40 
    millimeters (0.030 to 0.055 in). 
     
    The grit type utilities are made of durable material. This allows it to be used on bench grinders. The multipoint design allows small points to be used. This is different from the single point which has bruted points. The multipoint utilities are also cheaper. 
     
    PCD Cutting Utilities 
     
    These devices are made using High Temperature-High Pressure (HT-HP) press, usually a diamond wafer. Majority of wafers are polished and scored with EDM tools. After being cut into smaller parts, they are brazed. The brazing is on the drill, reamer, sawhide or other equipment. These utilities are utilized for machining nonferrous materials. 
     
    Diamond Saw Blades and Others 
     
    These are used for a variety of saws. These include tile saws, table saws, bridge saws, hand held grinders and walk-behind saws. The concave blade are utilized for scoring curves to install sculpt statues or sinks. 
     
    Tuck pointers are thick blades. They are employed for repair and used for putting the mortar in place. Crack chasers belong to another class. There are V-shaped blades used to fix concrete cracks. 
     
    Diamond tipped grinding cups are utilized for grinding stone. The diamond tipped core bits are hollow tubes with segments. They are used for making holes in concrete. 
     
    The PCD tool insert are used to work on high speed aluminum or ceramics. These devices also come in different sizes. Their specs may also vary. The PD tool insert are utilized for spinning centers for certain surfaces. 
     
    Not only are there many diamond tool sizes, but their specifications vary too. You need to make certain that the right pieces of equipment are chosen. 
    Tools